CentOS 6下搭建Apache+MySQL+PHP+SSL

 网上的一些文章都已经比较老了，现在版本高了之后，其实配置是很省力的（不考虑什么负载的话）

分享全过程，出了文中提到的安装epel rpmfushion 源指令不同外，其他的过程也适用与Centos 5

1.安装CentOS 6 ,可以选择最小安装，也可以安装桌面

2.升级系统

3.安装mysql,并设置mysql开机自启动，同时启动mysql

4.配置mysql的root密码

Enter current password for root (enter for none): ( 回车)
OK, successfully used password, moving on...

Setting the root password ensures that nobody can log into the MySQL
root user without the proper authorisation.

Set root password? [Y/n] (Y)

New password: (123456)
Re-enter new password: (123456)
Password updated successfully!
Reloading privilege tables..
 ... Success!

By default, a MySQL installation has an anonymous user, allowing anyone
to log into MySQL without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n]

(是否移出数据库的默认帐户，如果移出，那么在终端中直接输入mysql是会提示连接错误的)Y

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n]

(是否禁止root的远程登录)Y
By default, MySQL comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] Y
Reload privilege tables now? [Y/n] Y

5.安装apache,并设置开机启动

这时候可以测试apache是否正常工作

直接浏览器访问localhost应该没问题，但是如果别的机子访问不了的话，是因为防火墙的关系，配置防火墙

（后面的ssl还会有这个问题的）

6.安装php

这个时候php就安装完成拉，写个脚本测试一下

输入

访问localhost/info.php即可～

7.安装phpMyAdmin

首先先给系统安装epel 和rpmfushion两个软件大仓库

如果是centos 5 的话执行下面

接着安装起来就很方便拉，～根本不需要去下载就可以获得最新的版本

安装完成后还需要配置一下访问权限，使得出了本机外，其他机子也能访问phpMyAdmin

找到两个directory的权限设置，Allow from 改成All

<Directory /usr/share/phpMyAdmin/>
   order Deny,Allow
   Deny from All
   Allow from 127.0.0.1
   Allow from All
</Directory>
<Directory /usr/share/phpMyAdmin/setup/>
   order Deny,Allow
   Deny from All
   Allow from 127.0.0.1
   Allow from All
</Directory>

重启服务器

测试localhost/phpMyAdmin

用户名密码:root 123456

OK～ LAMP搭建完毕,

8.搭建SSL,让apache支持https

其实安装完这个模块后，重启完apache 就可以用https://localhost测试了，因为他创建了默认的证书

在/etc/pki/tls下

当然我们也可以用openssl创建自己的证书

生成证书文件
创建一个rsa私钥,文件名为server.key

Generating RSA private key, 1024 bit long modulus
............++++++
............++++++
e is 65537 (0x10001)


用 server.key 生成证书签署请求 CSR

Country Name:两个字母的国家代号
State or Province Name:省份名称
Locality Name:城市名称
organization Name:公司名称
organizational Unit Name:部门名称
Common Name:你的姓名
Email Address:地址
至于 'extra' attributes 不用输入.直接回车

生成证书CRT文件server.crt。

修改ssl.conf指定我们自己生成的证书

找到如下位置，修改路径

#   Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate.  If
# the certificate is encrypted, then you will be prompted for a
# pass phrase.  Note that a kill -HUP will prompt again.  A new
# certificate can be generated using the genkey(1) command.
SSLCertificateFile /etc/pki/tls/certs/localhost.crt

#   Server Private Key:
#   If the key is not combined with the certificate, use this
#   directive to point at the key file.  Keep in mind that if
#   you've both a RSA and a DSA private key you can configure
#   both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/pki/tls/private/localhost.key

OK

一切都搞定拉～～

整个过程我们不需要修改/etc/httpd/conf/httpd.conf 这就是版本高了的好处阿～